Kit I2C output card digital 8-bit 5-24V for DIN rail With the I2C output card 8 digital loads can be switched. The output driver turns UDN2981 a positive voltage up to 30V.
Digital I2C output card with optocouplers8-bit 5-24V for DIN rail With the I2C output card, 8 digital consumers can be switched.The output driver TBD62783APG switches a positive voltage up to 30V.
Kit I2C input card digital 8-bit 5-24V for DIN rail With the I2C input module you can read 8 digital signals up to 30V.
Digital I2C input card with optocouplers 8-bit 5-24V for DIN rail The I2C input module can be used to read 8 digital signals from 2.5V to 30V via the I2C bus. The inputs are galvanically isolated with optocouplers
Connection cable PG7xx to S5 CPU 3 meters Simatic S5 interface cable for SIMATIC - PG 7xx to the S5 CPU Identical to 6ES5734-2BF00 Length 3 metersother lengths on request
Connection cable operator panel S5 CPU AG-line such as 6XV1440-2AH32 (6XV1440-2Axxx)Length 3 metersother lengths on request
Kit serial converters, passive (V24 TTY) for programming of all SIMATIC S5 CPUs The cheap way to solder itself. cable length 3 m
25-pin SUB-D connector set Sub-D connector 25 pin fermale and metallized housing
Download cable for S7-HMI-Panel 3m For serial download of ProTool or WinCC flexible projects on an S7-OP / TP / MP. Connection between USB-RS232 with a TS Adapter.
Board "Serial converter active" etched, drilled tinned with solder mask Board individually if you want to get the components themselves. Size 100 * 50 mm
Connection cable PG7xx to S5 CPU 5 meters Simatic S5 interface cable for SIMATIC - PG 7xx to the S5 CPU Identical to 6ES5734-2BF00 Length 5 metersother lengths on request
Serial converters, passive (V24 TTY) 2,5 meters for programming of all SIMATIC S5 CPUs Finished module RS232 - TTY - converter completely developed and tested. Length 2,5 m
Switching power supply 24 V / 1,46 A Input: 100-240VOutput: 24V DC / 1,46 A
Plug-in switching power supply 5 V / 1 A In: 100-240V / 50-60 Hz 0.15 A Out: 5 V / 1 A Dimensions (LxWxH): 70 x 35 x 25 mm + connector contacts Connecting cable 1.5 m with barrel connector 5.5 pin diameter 2.1mm center positive.
Power cord for AC-Adapter black - length 1,4 m or 1,8 mCable cross-section 3x 0.75 mm² Load limit 6 A
Kit switching power supply control board 5V / 1A for DIN rail This 5V switching power supply control board I2C modules can be supplied with power.
Identical backup battery as SIEMENS 6ES7971-1AA00-0AA0 for S5 CPU 90U and S7 300 CPUs
Identical backup battery as SIEMENS 6EW1000-7AA für S5 CPU 110S, 115U /H /F, 130K, 130W, 150K /S, 135U, 150U /H, 155U /H
Identical backup battery as SIEMENS 6ES5980-0AE11 for S5 CPU 101U, 115U /H /F, 155U
Identical backup battery as SIEMENS 6ES7971-1AA00-0AA0 for S5 CPU 90U and S7 300 CPUs Please solder your existing connector itself!
Identical backup battery as SIEMENS 6ES7971-1AA00-0AA0 for S5 CPU 90U and S7 300 CPUs
Digital I2C output card with optocouplers8-bit 5-24V for DIN rail With the I2C output card, 8 digital consumers can be switched.The output driver TBD62783APG switches a positive voltage up to 30V.
Kit I2C analog input card 8 channel 10 bit for DIN-rail With the I2C analog input card 5 analog signals of 0-10 V can be read.
Digital I2C input card with optocouplers 8-bit 5-24V for DIN rail The I2C input module can be used to read 8 digital signals from 2.5V to 30V via the I2C bus. The inputs are galvanically isolated with optocouplers
Kit I2C analog input card 4 channel 18 bit for DIN-rail With the I2C analog input card 5 analog signals of 0-10 V +-10V +-2V or 0-20mA can be read.
Switching power supply 24 V / 1,46 A Input: 100-240VOutput: 24V DC / 1,46 A
Kit I2C input card digital 8-bit 5-24V for DIN rail With the I2C input module you can read 8 digital signals up to 30V.
Serial converter is active (V24 TTY) for programming of all SIMATIC S5 CPUs with long cable Active TTY - converter as a substitute for Köster box or for coupling to an S7 CP340 TTY. Length 3 m
