Power cord

M3 adhesive base with threaded pin M3 x 7mm

Resistor network for I2EOK 9 pin 8 resistors

Set I2C connection cable 5pol Accessories for I2C bus modules I2EOK, I2AOK, I2AT, I2AIN18 Not suitable for I2HE, I2AH, I2HAE, I2HAA ...

Set I2C bus connector 5-pin Accessories for I2C bus modules I2EOK, I2AOK, I2AT, I2AI18 Not suitable for I2HE, I2AH, I2HAE, I2HAA ...

Mounting frame for DIN rail Set WAGO Mounting base for our I2C rails kits

Kit I2C-Repeater with switch for Raspberry PI Level Translating from 3.3 V to 5 V for GPIO ports SDA and SCL

Digital I2C output card with optocouplers8-bit 5-24V for DIN rail With the I2C output card, 8 digital consumers can be switched.The output driver TBD62783APG switches a positive voltage up to 30V.

M3 adhesive base with thread M3

Digital I2C input card with optocouplers 8-bit 5-24V for DIN rail The I2C input module can be used to read 8 digital signals from 2.5V to 30V via the I2C bus. The inputs are galvanically isolated with optocouplers

M4 adhesive base with thread M4

Plug-in switching power supply 12 V / 2,5 A In: 100-240V / 50-60 Hz, 0.7 A maxOut: 12 V / 2500 mA = 2,5 AConnecting cable 1.7 m with barrel connectors Ø external 5,5 mm Øinternal 2,5 mm center positive.

Kit switching power supply control board 5V / 1A for DIN rail This 5V switching power supply control board I2C modules can be supplied with power.

Switching power supply 24 V / 1,46 A Input: 100-240VOutput: 24V DC / 1,46 A

Kit switching power supply control board 3,3V / 1A for DIN rail This 5V switching power supply control board I2C modules can be supplied with power.

Plug-in switching power supply 5 V / 1 A In: 100-240V / 50-60 Hz 0.15 A Out: 5 V / 1 A Dimensions (LxWxH): 70 x 35 x 25 mm + connector contacts Connecting cable 1.5 m with barrel connector 5.5 pin diameter 2.1mm center positive.

Switching power supply 12 V / 2 A Input: AC 200-240VOutput: DC 12 V/ 2 A

Kit switching power supply control board 5V / 2,5A for DIN rail This 5V switching power supply control board I2C modules can be supplied with power.

Switching power supply 5V / 3A In: 200-240V / 50-60 HzOut: 5 V DC / 3 A

Power cord for AC-Adapter black - length 1,5 m

Kit switching power supply control board 3,3V 5V 9V 10V 15V 24V / 2,5A for DIN-Rail This switched-mode power supply board can be used to supply the I2C modules or other devices with power.

Plug-in switching power supply 12 V / 1 A In: 100-240V / 50-60 Hz, 0.4 A maxOut: 12 V / 1000 mA = 1,0 AConnecting cable 1.8 m with barrel connectors Ø external 3,4 mm Øinternal 1,3 mm center positive.

Plug-in switching power supply 5 V / 2 A In: 100-240V / 50-60 HzOut: 5 V / 2 A Dimensions (LxWxH): 80 x 32 x 42 mm + connector contacts Connecting cable 1.5 m with 5.5 pin barrel connectors diameter 2,1 mm center positive.

Switching power supply 12 V-/4,17A Input: AC 200-240VOutput: DC 12 V-/4,17A

Plug-in switching power supply 12 V / 2 A In: 100-240V / 50-60 Hz, 0.6 AOut: 12 V / 2000 mA = 2 AConnecting cable 1.5 m with barrel connectors Ø external 5,5 mm Øinternal 2,1 mm center positive.

International Power Supply 5 V / 1200 mA = 1.2A Country adapter EU / GB / AU / US In: 100-240V / 50-60 Hz, 0,3 A maxOut: 5 V / 1,2 A Dimensions (LxWxH): 62 x 32 x 41 mm + connector contacts Connecting cable 1.5 m with barrel connectors Ø external 5,5 mm Øinternal 2,1 mm center positive.