Button for I2C-Repeater...
Button for I2C-Repeater Accessories for I2C-Repeater I2RPI+T-FG
Level Translating from 3.3 V to 5 V for GPIO ports SDA and SCL
The GPIO interface of the Raspberry PI is designed for 3.3V level. The I2C repeater raises the level of the SCL and SDA pins so that they are recognized clean 5V I2C slaves to 5V.
The following improvements we have implemented:
The kit contains the completely assembled PCB with all SMD components as well as the post connectors and 5-pole terminal strip. These can be ordered with either a fixed or pluggable terminal clamp.
Size of the circuit board 36 mm x 22 mm
Examples, see the blog post I2C-Pegelanpassung 3,3 / 5V für Raspberry PI
1 | PCB I2RPI ready soldered with all SMD components |
1 | Pin connector 26pin |
1 | terminal 5 pol. |
Button for I2C-Repeater Accessories for I2C-Repeater I2RPI+T-FG
connecting cable for I2C-Repeater Accessories for I2C-Repeater I2RPI+T-FG
Stacking Header 2 x 13 pin for I2C-Repeater Accessories for I2C-Repeater I2RPI+T-FG
Stacking Header 2 x 20 pin for I2C-Repeater Accessories for I2C-Repeater I2RPI+T-FG
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Digital I2C output card with power transistors8-bit 5-24V for DIN rail With the I2C output card, 8 digital consumers can be switched.The power transistor BD676 can switch 40V 1A.
Set I2C bus connector 5-pin Accessories for I2C bus modules I2EOK, I2AOK, I2AT, I2AI18 Not suitable for I2HE, I2AH, I2HAE, I2HAA ...
Digital I2C input card with optocouplers 8-bit 5-24V for DIN rail The I2C input module can be used to read 8 digital signals from 2.5V to 30V via the I2C bus. The inputs are galvanically isolated with optocouplers
Set I2C connection cable 5pol Accessories for I2C bus modules I2EOK, I2AOK, I2AT, I2AIN18 Not suitable for I2HE, I2AH, I2HAE, I2HAA ...
Digital I2C output card with optocouplers8-bit 5-24V for DIN rail With the I2C output card, 8 digital consumers can be switched.The output driver TBD62783APG switches a positive voltage up to 30V.
Mounting frame for DIN rail Set WAGO Mounting base for our I2C rails kits
Kit I2C I2C-RS232-Modem 2 for DIN rail With this modemyou can control or read I2C slaves via the serial RS232 interface. The baud rate adjustable via PC software. Command Set is the same as the I2C-USB modem
Kit switching power supply control board 3,3V 5V 9V 10V 15V 24V / 2,5A for DIN-Rail This switched-mode power supply board can be used to supply the I2C modules or other devices with power.
Mounting clip for DIN rail Rittal SZ 2309.000 inkl. Screws M4 x 10
Kit switching power supply control board 3,3V / 1A for DIN rail This 5V switching power supply control board I2C modules can be supplied with power.
Digital I2C output card for AC voltage 24V AC / 1Awith optocoupler and triac 8-bit for DIN rail With the I2C output card, 8 digital AC power consumers can be switched.
Digital I2C output card with power transistors8-bit 5-24V for DIN rail With the I2C output card, 8 digital consumers can be switched.The power transistor BD676 can switch 40V 1A.
Kit I2C-Repeater for Raspberry PI Level Translating from 3.3 V to 5 V for GPIO ports SDA and SCL
Kit simulator module for 8 digital signals (8-bit) for DIN-rail mounting setpoint adjuster for eight digital signals for connection to the digital input card.
Mounting frame for DIN rail Set WAGO Mounting base for our I2C rails kits
Digital I2C output card with optocouplers8-bit 5-24V for DIN rail With the I2C output card, 8 digital consumers can be switched.The output driver TBD62783APG switches a positive voltage up to 30V.
Kit I2C analog output card 4 channel 10 bit for DIN-rail With the I2C analog output card 4 analog control signals of 0-10 V can be output.
Kit I2C analog input card 5 channel 10 bit for DIN-rail With the I2C analog input card 5 analog signals of 0-10 V can be read.
Kit I2C ARDUINO module for "Arduino Pro Micro" on DIN rail Put the "ARDUINO Pro Micro" on the top-hat rail and write your own applications as an I2C master or I2C slave.
Simulator module for 5 alalog signals for DIN-rail mounting setpoint adjuster for five 0-10V analog signals for connection to the analogue input card
I2C pulse counter kit with PCF8583 and optocoupler 2-channel counter for fast pulses