8-Bit expander for I2C-Bus
Manufacturer information
Responsible person for the EU
Horter & Kalb
Jürgen Horter
Klinikumallee 23
)5445 Bayreuth
mail@horter.de
Kit I2C input card digital 8-bit 5-24V for DIN rail With the I2C input module you can read 8 digital signals up to 30V.
Kit I2C digital input board 8-bit with optocoupler and latch All components including the PCB
I2C output board with relay output stages 8- bit digital All components required for the I2C output board including 8 single-line relay 5V with integr. Free-wheeling diode. Switching capacity max. 200V AC 15W
Digital I2C input card with optocouplers 8-bit 5-24V for DIN rail The I2C input module can be used to read 8 digital signals from 2.5V to 30V via the I2C bus. The inputs are galvanically isolated with optocouplers
Digital I2C output card with optocouplers8-bit 5-24V for DIN rail With the I2C output card, 8 digital consumers can be switched.The output driver TBD62783APG switches a positive voltage up to 30V.
Digital I2C input card with optocouplers 8-bit 5-24V for DIN rail The I2C input module can be used to read 8 digital signals from 2.5V to 30V via the I2C bus. The inputs are galvanically isolated with optocouplers
Kit switching power supply control board 5V / 2,5A for DIN rail This 5V switching power supply control board I2C modules can be supplied with power.
I2C-Repeater with switch for Raspberry PI Level Translating from 3.3 V to 5 V for GPIO ports SDA and SCL
Level translating and I2C-bus repeater with PCA9517 The kit includes all required components and the circuit board.
Longer I2C bus wires with the P82B715 The kit includes all required components and the circuit board.
Set I2C bus connector 5-pin Accessories for I2C bus modules I2EOK, I2AOK, I2AT, I2AI18 Not suitable for I2HE, I2AH, I2HAE, I2HAA ...
Button for I2C-Repeater Accessories for I2C-Repeater I2RPI+T-FG
Mounting frame for DIN rail Set WAGO Mounting base for our I2C rails kits
Programmed PIC for our analog input module 5 channel 10 bit (I2HAE-Bk)
Digital I2C output card with power transistors8-bit 5-24V for DIN rail With the I2C output card, 8 digital consumers can be switched.The power transistor BD676 can switch 40V 1A.
I2C digital output board without amplifiers If you want to have mixed the output stages ( eg 2 Ralais and 6 transistors)You can order the basic components here and the output stages separately below in the shop
Set I2C connection cable 5pol Accessories for I2C bus modules I2EOK, I2AOK, I2AT, I2AIN18 Not suitable for I2HE, I2AH, I2HAE, I2HAA ...
connect several I2C slaves with the same bus address on the I2C bus
connect several I2C slaves with the same bus address on the I2C bus
I2C clock and calendar chip, based on a 2048-bit static CMOS RAMIt can be used as clock or RTC for counting pulses are used.
