Darlington Transistor Array 8 Channel

Matching ARDUINO Pro Micro for the I2ARD module

Mounting frame for DIN rail Set WAGO Mounting base for our I2C rails kits

Set I2C connection cable 5pol Accessories for I2C bus modules I2EOK, I2AOK, I2AT, I2AIN18 Not suitable for I2HE, I2AH, I2HAE, I2HAA ...

Kit I2C multiplexer for DIN rail mounting With the I2C multiplexer, it is possible multiple I2C slaves with the same bus address to connect to the I2C bus.

Kit I2C ARDUINO module for "Arduino Pro Micro" on DIN rail  Put the "ARDUINO Pro Micro" on the top-hat rail and write your own applications as an I2C master or I2C slave.

Resistor network for I2EOK 9 pin 8 resistors

Breakoutboard with I2C Calendar & Clock PCF 8583 The kit includes all required components and the circuit board.

Set I2C bus connector 5-pin Accessories for I2C bus modules I2EOK, I2AOK, I2AT, I2AI18 Not suitable for I2HE, I2AH, I2HAE, I2HAA ...

Digital I2C output card with optocouplers8-bit 5-24V for DIN rail With the I2C output card, 8 digital consumers can be switched.The output driver TBD62783APG switches a positive voltage up to 30V.

8-Bit expander for I2C-Bus

Hot Swappable, Dual I2C Isolators

I2C / SM-Bus Accelerator LTC1694-1

Programmed PIC for our analog input module 8 channel 10 bit 250Hz (I2AE8-Bk)

Programmed PIC for our I2C-RS232-Modem 1

CMOS serial EEPROM 1024 Byte = 8 kBit

4 analog inputs, 1 analog output for the I2C bus

connect several I2C slaves with the same bus address on the I2C bus

CMOS serial EEPROM 512 Byte = 4 kBit

CMOS serial EEPROM 2048 Byte = 16 kBit

Programmed PIC for our LCD Display

I2C clock and calendar chip, based on a 2048-bit static CMOS RAMIt can be used as clock or RTC for counting pulses are used.

digital temperature sensor with an I2C interface.

Precision CMOS rail-to-rail input and output op amps

TOSHIBA 8 Channel Common Source Power DMOS Array

Programmed GAL for our I2C Input card I2E-Bk