The Mini W5500 network module can be used to connect the I2C master to the Ethernet.
The WIZnet W5500 chip is a powerful Ethernet controller with an integrated TCP/IP stack.
Here are some of the most important technical data:
- High-speed SPI interface with up to 80 MHz
- Built-in hardware-based TCPIP protocol stack
- Supports the protocols TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
- Embedded 10BaseT/100BaseTX Ethernet PHY
- up to 8 socket connections
- Integrated data link layer and physical layer
- Power saving mode with wake-up function
- RJ45 socket with W5500 chip and status LED
- 3.3 V with 5 V I/O signal tolerance
- Compatible with Arduino, Raspberry Pi and many more.
- 1x W5500 Mini Network Module
| Microcontroller | WIZnet W5500 |
| Ethernet-Standard | 10BaseT / 100BaseTX |
| Transmission rate | 10/100 MBps |
| SPI clock frequency | bis zu 80 MHz |
| Memory | 32 KB internal memory for TX/RX-buffer |
| Anzahl der Sockets | 8 independent sockets simultaneously |
| Supply voltage | 3,3 V min. 200mA |
| IO-Ports | 3,3 V; 5 V tolerant |
| Dimension | 23 x 29 x 24 mm |
| Weight | 9 gr. |
Kit I2C WLAN module for the WEMOS-D1 on DIN rail With this WLAN module you can control I2C modules via the WLAN.
Kit I2C ARDUINO module for "Arduino Pro Micro" on DIN rail Put the "ARDUINO Pro Micro" on the top-hat rail and write your own applications as an I2C master or I2C slave.
I2C master kit with ARDUINO-UNO and optional W5500 LAN on DIN rail Compact I2C master with an "Arduino UNO" for the DIN rail. The module can be used to implement a variety of applications with the Arduino IDE or with Platform IO. For example: - I2C Modbus-TCP Server- I2C MQTT Client /...
Kit I2C input card digital 8-bit 5-24V for DIN rail With the I2C input module you can read 8 digital signals up to 30V.
Mounting frame for DIN rail Set WAGO Mounting base for our I2C rails kits
I2C master kit with ARDUINO-UNO and optional W5500 LAN on DIN rail Compact I2C master with an "Arduino UNO" for the DIN rail. The module can be used to implement a variety of applications with the Arduino IDE or with Platform IO. For example: - I2C Modbus-TCP Server- I2C MQTT Client /...
Set I2C bus connector 5-pin Accessories for I2C bus modules I2EOK, I2AOK, I2AT, I2AI18 Not suitable for I2HE, I2AH, I2HAE, I2HAA ...
Digital I2C output card with optocouplers8-bit 5-24V for DIN rail With the I2C output card, 8 digital consumers can be switched.The output driver TBD62783APG switches a positive voltage up to 30V.
Kit I2C WLAN module for the WEMOS-D1 on DIN rail With this WLAN module you can control I2C modules via the WLAN.
Kit I2C ARDUINO module for "Arduino Pro Micro" on DIN rail Put the "ARDUINO Pro Micro" on the top-hat rail and write your own applications as an I2C master or I2C slave.
I2C master kit with ARDUINO-UNO and optional W5500 LAN on DIN rail Compact I2C master with an "Arduino UNO" for the DIN rail. The module can be used to implement a variety of applications with the Arduino IDE or with Platform IO. For example: I2C Modbus-TCP server I2C MQTT server or I2C-MQTT...
