Kit I2C-RS232 coupler

€10.95

Tax included Shipping excluded

Delivery Time: Delivery time 3-5 working days germany / about 10 days Europe

Reference: I2Ps-Bk

EAN13: 4260404260547

The I2C-coupler converts the V24 signals of the serial interface (RS232) in 5V signals for the I2C hardware.

The kit includes all required components and the circuit board.

Volume discounts

Quantity	Unit discount	You Save
5	€1.00	Up to €5.00
10	€2.00	Up to €20.00

Description
Product Details

Description

In order to address the I2C hardware to the PC, we have developed a simple coupler for the Serial port (COM port) of the PC.
The signals SCL and SDA as well as the INT signal to the input modules are on the V24 level of the RS232 - interface implemented.

Dimensions of the circuit board 45 x 55 mm.

Links:

More information and program examples here: I2C-RS232-Koppler

Downloads

Data Sheet Schematic Diagram

Partlist:

1	I2PM-LP circuit board for I2C-coupler
3	Resistor 270 Ohm
6	Resistor 4,7 kOhm
1	LED 3mm red
1	LED 3mm yellow
1	LED 3mm green
4	Elko 10yF
1	Ceramic Capacitor 100 nF
1	Transistor BC546
1	MAX 232
1	IC socket 16 pin
1	74LS05
1	IC socket 14 pin
3	pin connectors 3 pol and Jumper
2	terminal 5pol.
1	SUB-D cable 9pin fermale

Reference I2Ps-Bk

Specific References

EAN13: 4260404260547

Condition New

Case for I2C-RS232-Coupler

I2PS-Gg

Finish machined case for I2C-RS232-Coupler The holes for the LEDs and the cable entries are drilled. A piece of cable (50 cm) for the I2C-side, four screws for attaching the printed circuit board and two cable ties to secure the cables are included.

€2.80

AC-Adapter 5V / 2A

NT5-20

Plug-in switching power supply 5 V / 2 A In: 100-240V / 50-60 HzOut: 5 V / 2 A Dimensions (LxWxH): 80 x 32 x 42 mm + connector contacts Connecting cable 1.5 m with 5.5 pin barrel connectors diameter 2,1 mm center positive.

€7.90

Comments (0)

9 other products in the same category:

Case for I2C-RS232-Modem 1

I2PM-Gg

Finish machined case for I2C-RS232 modem 1 The holes for the LEDs and the cable entries are drilled. A piece of cable (50 cm) for the I2C-side, four screws for attaching the printed circuit board and two cable ties to secure the cables are included.

€2.80

PIC18F1320P programmed for...

I2PM2-PIC

Programmed PIC for our I2C-RS232-Modem 2

€14.50

Case for I2C-RS232-Coupler

I2PS-Gg

€2.80

Kit I2C-USB-Modem PC...

I2UM-Bk

With the I2C-USB mode, you can access I2C slaves via the PC. The kit includes all required components and the printed circuit board on which the FTDI SMD chip is already installed.

€29.95

Case for I2C USB modem

I2UM-GgF

Finish machined case for I2C-USB modem. The holes for the LEDs and the power supply are drilled. Furthermore millings for the tub and plug the USB connector are made on both sides.

€4.80

Kit I2C RS232 Modem 2 / PC...

I2HM-Bk

Kit I2C I2C-RS232-Modem 2 for DIN rail With this modemyou can control or read I2C slaves via the serial RS232 interface. The baud rate adjustable via PC software. Command Set is the same as the I2C-USB modem

€29.90

Kit I2C-RS232-Modem 1 / PC...

I2PM-Bk

For communication to I2C commands as ASCII control sequences via the COM interface send and receive. The kit includes all required components and the circuit board. All prices include VAT plus shipping costs.Delivery time 2-3 daysPrice changes and errors excepted.

€24.95