Self-adhesive base with an M3 thread

Set I2C connection cable 5pol Accessories for I2C bus modules I2EOK, I2AOK, I2AT, I2AIN18 Not suitable for I2HE, I2AH, I2HAE, I2HAA ...

Digital I2C output card with power transistors8-bit 5-24V for DIN rail With the I2C output card, 8 digital consumers can be switched.The power transistor BD676 can switch 40V 1A.

M3 adhesive base with threaded pin and nut

Digital I2C output card with optocouplers8-bit 5-24V for DIN rail With the I2C output card, 8 digital consumers can be switched.The output driver TBD62783APG switches a positive voltage up to 30V.

M3 adhesive base and plastic screw M3 x 6 mm

Power cord for AC-Adapter black - length 1,4 m or 1,8 mCable cross-section   3x 0.75 mm² Load limit  6 A 

M4 adhesive base and screw M4 x 6 mm

Digital I2C input card with optocouplers 8-bit 5-24V for DIN rail The I2C input module can be used to read 8 digital signals from 2.5V to 30V via the I2C bus. The inputs are galvanically isolated with optocouplers

Kit I2C-Repeater with switch for Raspberry PI Level Translating from 3.3 V to 5 V for GPIO ports SDA and SCL

M3 adhesive base with threaded pin M3 x 7mm

Kit I2C-Repeater for Raspberry PI Level Translating from 3.3 V to 5 V for GPIO ports SDA and SCL

Mounting frame for DIN rail Set WAGO Mounting base for our I2C rails kits

Kit I2C I2C-RS232-Modem 2 for DIN rail With this modemyou can control or read I2C slaves via the serial RS232 interface. The baud rate adjustable via PC software. Command Set is the same as the I2C-USB modem

M4 adhesive base with thread M4

Stacking Header 2 x 20 pin for I2C-Repeater Accessories for I2C-Repeater I2RPI+T-FG

Set I2C bus connector 5-pin Accessories for I2C bus modules I2EOK, I2AOK, I2AT, I2AI18 Not suitable for I2HE, I2AH, I2HAE, I2HAA ...

M3 adhesive base and screw M3 x 6 mm

M3 adhesive base with threaded pin and nut

M3 adhesive base with threaded pin M3 x 7mm

M3 adhesive base and plastic screw M3 x 6 mm