I2C-Assemblies

Finish machined case for I2C-RS232 modem 1 The holes for the LEDs and the cable entries are drilled. A piece of cable (50 cm) for the I2C-side, four screws for attaching the printed circuit board and two cable ties to secure the cables are included.

Finish machined case for I2C-RS232 modem 1 The holes for the LEDs and the cable entries are drilled. A piece of cable (50 cm) for the I2C-side, four screws for attaching the printed circuit board and two cable ties to secure the cables are included.

Kit I2C I2C-RS232-Modem 2 for DIN rail With this modemyou can control or read I2C slaves via the serial RS232 interface. The baud rate adjustable via PC software. Command Set is the same as the I2C-USB modem

Kit I2C I2C-RS232-Modem 2 for DIN rail With this modemyou can control or read I2C slaves via the serial RS232 interface. The baud rate adjustable via PC software. Command Set is the same as the I2C-USB modem

I2C Bus Buffer for longer lines at the I2C bus

I2C Bus Buffer for longer lines at the I2C bus

Smart Card 4442 EEProm 256 Byte Pin-Code FF FF FF Smart card with PIN-protected EEPROM memory (code FF FF FF). Chip: SLE 4442 Infineon 256 Bytes (2 kbit) +PIN CAUTION: These smart cards are not suitable for I2C chip card reader! ISO-Format 85,7 x 54 x 0,81 mm

Smart Card 4442 EEProm 256 Byte Pin-Code FF FF FF Smart card with PIN-protected EEPROM memory (code FF FF FF). Chip: SLE 4442 Infineon 256 Bytes (2 kbit) +PIN CAUTION: These smart cards are not suitable for I2C chip card reader! ISO-Format 85,7 x 54 x 0,81 mm

Kit switching power supply control board 5V / 1A for DIN rail This 5V switching power supply control board I2C modules can be supplied with power.

Kit switching power supply control board 5V / 1A for DIN rail This 5V switching power supply control board I2C modules can be supplied with power.

Stacking Header 2 x 13 pin for I2C-Repeater Accessories for I2C-Repeater I2RPI+T-FG

Stacking Header 2 x 13 pin for I2C-Repeater Accessories for I2C-Repeater I2RPI+T-FG

For communication to I2C commands as ASCII control sequences via the COM interface send and receive. The kit includes all required components and the circuit board. All prices include VAT plus shipping costs.Delivery time 2-3 daysPrice changes and errors excepted.

For communication to I2C commands as ASCII control sequences via the COM interface send and receive. The kit includes all required components and the circuit board. All prices include VAT plus shipping costs.Delivery time 2-3 daysPrice changes and errors excepted.

Smart Card with I2C-bus EEprom memory 256 bytes (2k bit) Chip: ST14C02/X24026 ISO format 85.7 x 54 x 0.81 mm

Smart Card with I2C-bus EEprom memory 256 bytes (2k bit) Chip: ST14C02/X24026 ISO format 85.7 x 54 x 0.81 mm

Finish machined case for I2C-RS232-Coupler The holes for the LEDs and the cable entries are drilled. A piece of cable (50 cm) for the I2C-side, four screws for attaching the printed circuit board and two cable ties to secure the cables are included.

Finish machined case for I2C-RS232-Coupler The holes for the LEDs and the cable entries are drilled. A piece of cable (50 cm) for the I2C-side, four screws for attaching the printed circuit board and two cable ties to secure the cables are included.

Programmed PIC for our analog input module 5 channel 10 bit (I2HAE-Bk)

Programmed PIC for our analog input module 5 channel 10 bit (I2HAE-Bk)

Stacking Header 2 x 20 pin for I2C-Repeater Accessories for I2C-Repeater I2RPI+T-FG

Stacking Header 2 x 20 pin for I2C-Repeater Accessories for I2C-Repeater I2RPI+T-FG

Programmed PIC for our I2C-RS232-Modem 1

Programmed PIC for our I2C-RS232-Modem 1

Transistor power amp to the above kit without amplifiers. Switching capacity max. 45V 1.5A

Transistor power amp to the above kit without amplifiers. Switching capacity max. 45V 1.5A

Smart Card with I2C-bus EEprom memory 2k Byte (16k-Bit) Chip: AT24C16ISO format 85.7 x 54 x 0.81 mm

Smart Card with I2C-bus EEprom memory 2k Byte (16k-Bit) Chip: AT24C16ISO format 85.7 x 54 x 0.81 mm

The I2C-coupler converts the V24 signals of the serial interface (RS232) in 5V signals for the I2C hardware. The kit includes all required components and the circuit board.

The I2C-coupler converts the V24 signals of the serial interface (RS232) in 5V signals for the I2C hardware. The kit includes all required components and the circuit board.

Programmed PIC for our analog input module 8 channel 10 bit 250Hz (I2AE8-Bk)

Programmed PIC for our analog input module 8 channel 10 bit 250Hz (I2AE8-Bk)

Programmed PIC for our I2C-RS232-Modem 2

Programmed PIC for our I2C-RS232-Modem 2

Relay amp to the above kit without amplifiers. Switching capacity max. 200V AC 15W

Relay amp to the above kit without amplifiers. Switching capacity max. 200V AC 15W

Describe and read I2C EEPROMs. The kit includes all required components and the circuit board.

Describe and read I2C EEPROMs. The kit includes all required components and the circuit board.

Smart Card with I2C-bus EEprom memory 64k bytes (512k bit) Chip: AT24C512ISO format 85.7 x 54 x 0.81 mm

Smart Card with I2C-bus EEprom memory 64k bytes (512k bit) Chip: AT24C512ISO format 85.7 x 54 x 0.81 mm

Programmed PIC for our analog output module 5 channel 10 bit (I2HAA-Bk)

Programmed PIC for our analog output module 5 channel 10 bit (I2HAA-Bk)

Programmed PIC for our I2C-USB-Modem

Programmed PIC for our I2C-USB-Modem

CMOS serial EEPROM 256 Byte = 2 kBit

CMOS serial EEPROM 256 Byte = 2 kBit

I2C bus length up to 200m per data sheet with the P82B96. The kit includes all required components and the circuit board.

I2C bus length up to 200m per data sheet with the P82B96. The kit includes all required components and the circuit board.