AC-Adapter 24 V / 1,46 A

Precision measuring resistor 500 Ohm 0.1% 0.4W With this resistor, a current signal 0-20mA can be converted into a voltage signal 0-10V.Conversion 0-20mA signal in 0-10VConversion 4-20mA signal in 2-10VThe voltage can then be measured with the analog card.

Power cord for AC-Adapter black - length 1,5 m

Set I2C connection cable 5pol Accessories for I2C bus modules I2EOK, I2AOK, I2AT, I2AIN18 Not suitable for I2HE, I2AH, I2HAE, I2HAA ...

Mounting frame for DIN rail Set WAGO Mounting base for our I2C rails kits

Set I2C bus connector 5-pin Accessories for I2C bus modules I2EOK, I2AOK, I2AT, I2AI18 Not suitable for I2HE, I2AH, I2HAE, I2HAA ...

Digital I2C output card for AC voltage 24V AC / 1Awith optocoupler and triac 8-bit for DIN rail With the I2C output card, 8 digital AC power consumers can be switched.

Digital I2C input card with optocouplers 8-bit 5-24V for DIN rail The I2C input module can be used to read 8 digital signals from 2.5V to 30V via the I2C bus. The inputs are galvanically isolated with optocouplers

I2C-Repeater for Raspberry PI finished Level Translating from 3.3 V to 5 V for GPIO ports SDA and SCL

Switching power supply 12 V / 2 A Input: AC 200-240VOutput: DC 12 V/ 2 A

Kit switching power supply control board 3,3V 5V 9V 10V 15V 24V / 2,5A for DIN-Rail This switched-mode power supply board can be used to supply the I2C modules or other devices with power.

International Power Supply 5 V / 1200 mA = 1.2A Country adapter EU / GB / AU / US In: 100-240V / 50-60 Hz, 0,3 A maxOut: 5 V / 1,2 A Dimensions (LxWxH): 62 x 32 x 41 mm + connector contacts Connecting cable 1.5 m with barrel connectors Ø external 5,5 mm Øinternal 2,1 mm center positive.

Plug-in switching power supply 12 V / 2 A In: 100-240V / 50-60 Hz, 0.6 AOut: 12 V / 2000 mA = 2 AConnecting cable 1.5 m with barrel connectors Ø external 5,5 mm Øinternal 2,1 mm center positive.

Kit switching power supply control board 3,3V / 1A for DIN rail This 5V switching power supply control board I2C modules can be supplied with power.

Kit switching power supply control board 5V / 2,5A for DIN rail This 5V switching power supply control board I2C modules can be supplied with power.

Plug-in switching power supply 12 V / 1 A In: 100-240V / 50-60 Hz, 0.4 A maxOut: 12 V / 1000 mA = 1,0 AConnecting cable 1.8 m with barrel connectors Ø external 3,4 mm Øinternal 1,3 mm center positive.

Plug-in switching power supply 12 V / 2,5 A In: 100-240V / 50-60 Hz, 0.7 A maxOut: 12 V / 2500 mA = 2,5 AConnecting cable 1.7 m with barrel connectors Ø external 5,5 mm Øinternal 2,5 mm center positive.

Plug-in switching power supply 5 V / 2 A In: 100-240V / 50-60 HzOut: 5 V / 2 A Dimensions (LxWxH): 80 x 32 x 42 mm + connector contacts Connecting cable 1.5 m with 5.5 pin barrel connectors diameter 2,1 mm center positive.

Switching power supply 12 V-/4,17A Input: AC 200-240VOutput: DC 12 V-/4,17A

Power cord for AC-Adapter black - length 1,5 m

Power cord for AC-Adapter black - length 1,4 m or 1,8 mCable cross-section   3x 0.75 mm² Load limit  6 A 

Switching power supply 5V / 3A In: 200-240V / 50-60 HzOut: 5 V DC / 3 A

Plug-in switching power supply 5 V / 1 A In: 100-240V / 50-60 Hz 0.15 A Out: 5 V / 1 A Dimensions (LxWxH): 70 x 35 x 25 mm + connector contacts Connecting cable 1.5 m with barrel connector 5.5 pin diameter 2.1mm center positive.

Kit switching power supply control board 5V / 1A for DIN rail This 5V switching power supply control board I2C modules can be supplied with power.