I2C-Smart Card 256 Byte...
Smart Card with I2C-bus EEprom memory 256 bytes (2k bit) Chip: ST14C02/X24026 ISO format 85.7 x 54 x 0.81 mm
for SIMATIC HMI-Panels TP / OP
OP5, TD17, OP17, OP25, OP27,TP27, OP35, OP37, TP37, OP47, OP270, TP270, MP270, MP270B, MP370
and all otherversions of OP15,OP397
The battery can bemounted in thecontrol unit withcable ties supplied.
Follow the installationinstructionsin the manualof the operator panel.
Type: | Lithium Batterie 1/2AA |
Dimension: | 14.5 x 25.2 mm |
Nominal voltage / capacity: | 3.6 V / 1200 mAh (1,2 Ah) |
Technology: | lithium-metal |
Lithium amount: | 0.3 g |
Manufacturer: | TEKCELL |
Batteries may not be disposed of with household waste. As a consumer you are legally obliged to return used batteries. Batteries can be returned free of charge after use in the immediate vicinity (eg, municipal collection points or in stores).
We got batteries you can use free of charge by return with us or with sufficient postage and return by post to us.
Batteries that contain hazardous substances are labeled with the symbol of a crossed out wheelie bin.
Close to the wheelie bin symbol is the chemical name of the pollutant.
Cd or NiCd stands for cadmium, Pb for lead and Hg for mercury.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Smart Card with I2C-bus EEprom memory 256 bytes (2k bit) Chip: ST14C02/X24026 ISO format 85.7 x 54 x 0.81 mm
Kit simulator module for 8 digital signals (8-bit) for DIN-rail mounting setpoint adjuster for eight digital signals for connection to the digital input card.
I2C-Repeater for Raspberry PI finished Level Translating from 3.3 V to 5 V for GPIO ports SDA and SCL
Kit I2C input card digital 8-bit 5-24V for DIN rail With the I2C input module you can read 8 digital signals up to 30V.
Connection cable PG7xx to S5 CPU 5 meters Simatic S5 interface cable for SIMATIC - PG 7xx to the S5 CPU Identical to 6ES5734-2BF00 Length 5 metersother lengths on request
Digital I2C output card with optocouplers8-bit 5-24V for DIN rail With the I2C output card, 8 digital consumers can be switched.The output driver TBD62783APG switches a positive voltage up to 30V.
Plug-in switching power supply 5 V / 2 A In: 100-240V / 50-60 HzOut: 5 V / 2 A Dimensions (LxWxH): 80 x 32 x 42 mm + connector contacts Connecting cable 1.5 m with 5.5 pin barrel connectors diameter 2,1 mm center positive.
Serial converters prof. passive (V24 TTY) 5 meters for programming of all SIMATIC S5 CPUs Finished module RS232 - TTY - converter completely developed and tested. Length 5 m PLC connector housing with sliding lock
Kit I2C ARDUINO module for "Arduino Pro Micro" on DIN rail Put the "ARDUINO Pro Micro" on the top-hat rail and write your own applications as an I2C master or I2C slave.
Serial converter is active (V24 TTY) for programming of all SIMATIC S5 CPUs with long cable Active TTY - converter as a substitute for Köster box or for coupling to an S7 CP340 TTY. Length 3 m
Kit I2C analog input card 8 channel 10 bit for DIN-rail With the I2C analog input card 5 analog signals of 0-10 V can be read.
Kit I2C WLAN module for the WEMOS-D1 on DIN rail With this WLAN module you can control I2C modules via the WLAN.
Kit I2C I2C-RS232-Modem 2 for DIN rail With this modemyou can control or read I2C slaves via the serial RS232 interface. The baud rate adjustable via PC software. Command Set is the same as the I2C-USB modem
Longer I2C bus wires with the P82B715 The kit includes all required components and the circuit board.