I2C Analog-to-Digital Converter - ADC 18B delta-sigma ADC dual Ch 4sp
Simulator Panel Voltmeter Module 6 analog measurements 0-30V Digital display for six 0-30V analog values for connection to the analog output card.
With the I2C-USB mode, you can access I2C slaves via the PC. The kit includes all required components and the printed circuit board on which the FTDI SMD chip is already installed.
Mounting frame for DIN rail Set WAGO Mounting base for our I2C rails kits
Kit simulator module for 8 digital signals (8-bit) for DIN-rail mounting setpoint adjuster for eight digital signals for connection to the digital input card.
Simulator module for 5 alalog signals for DIN-rail mounting setpoint adjuster for five 0-10V analog signals for connection to the analogue input card
Kit I2C analog input card 4 channel 18 bit for DIN-rail With the I2C analog input card 5 analog signals of 0-10 V +-10V +-2V or 0-20mA can be read.
Kit I2C output card digital 8-bit 5-24V for DIN rail With the I2C output card 8 digital loads can be switched. The output driver turns UDN2981 a positive voltage up to 30V.
Kit I2C analog input card 4 channel 18 bit for DIN-rail With the I2C analog input card 5 analog signals of 0-10 V +-10V +-2V or 0-20mA can be read.
Set I2C connection cable 5pol Accessories for I2C bus modules I2EOK, I2AOK, I2AT, I2AIN18 Not suitable for I2HE, I2AH, I2HAE, I2HAA ...
Kit I2C input card digital 8-bit 5-24V for DIN rail With the I2C input module you can read 8 digital signals up to 30V.
Set I2C bus connector 5-pin Accessories for I2C bus modules I2EOK, I2AOK, I2AT, I2AI18 Not suitable for I2HE, I2AH, I2HAE, I2HAA ...
Programmed PIC for our analog output module 5 channel 10 bit (I2HAA-Bk)
I2C binary-coded decimal clock / calendar block with additional 56 bytes of NV-SRAMThe module provides data for seconds, minutes, hours, days, dates, months, and year. The last day of the month is adjusted automatically.
connect several I2C slaves with the same bus address on the I2C bus
Programmed PIC for our analog input module 5 channel 10 bit (I2HAE-Bk)
Programmed PIC for our I2C radio transmitter 433 MHz for DIN rail(I2HFS-Bk)
Programmed PIC for our analog input module 8 channel 10 bit 250Hz (I2AE8-Bk)
I2C clock and calendar chip, based on a 2048-bit static CMOS RAMIt can be used as clock or RTC for counting pulses are used.
